LTX cameras by Baumer, Ltd. use CAST JPEG IP cores, reducing bandwidth, CPU load, and required storage capacity while simplifying the camera system design and ...
Silicon IP Cores
JPEG-EX-S
Baseline and Extended JPEG Encoder
This JPEG compression IP core supports the Baseline Sequential DCT and Extended Sequential DCT modes of the ISO/IEC 10918-1 standard. It implements an area-efficient, high-performance, ASIC or FPGA hardware JPEG encoder with very low processing latency.
The JPEG-EX-S encoder produces compressed JPEG images and the video payload for Motion-JPEG container formats. It accepts images with 8- or 12-bit color samples and up to four color components, in all widely-used color subsampling formats.
The encoder processes one color sample per clock cycle, enabling it to compress multiple Full-HD channels even in low-cost FPGAs. One of the smallest JPEG encoders available, it requires just 80,000 equivalent gates when mapped on an ASIC technology.
Once programmed, the easy-to-use encoder requires no assistance from a host processor to compress an arbitrary number of frames. SoC integration is straightforward thanks to standardized AMBA® interfaces: AXI Streaming for pixel and compressed data, and a 32-bit APB slave interface for registers access. Users can optionally insert timestamps or other metadata in the compressed stream using a dedicated AXI Streaming interface.
Customers with a short time to market priority can use CAST’s IP Integration Services to receive complete JPEG subsystems. These integrate the JPEG encoder with video interface controllers, Hardware UDPIP or Transport Stream networking stacks, or other IP cores available from CAST.
The core is designed with industry best practices, and its reliability and low risk have been proven through both rigorous verification and customer production. Its deliverables include a complete verification environment and a bit-accurate software model.
The core has been verified through extensive synthesis, place and route and simulation runs. It has also been embedded in several products, and is proven in both ASIC and FPGA technologies.
Support
The core as delivered is warranted against defects for ninety days from purchase. Thirty days of phone and email technical support are included, starting with the first interaction. Additional maintenance and support options are available.
Deliverables
The core is available in ASIC (synthesizable HDL) and FPGA (netlist) forms, and includes everything required for successful implementation. The deliverable includes:
- Verilog RTL source code
- Sophisticated self-checking Testbench
- Software (C++) Bit-Accurate Model
- Sample simulation and synthesis scripts
- Comprehensive user documentation
The JPEG-EX-S core can be mapped to any ASIC and optimized to suit the particular project’s requirements. The following table provides sample implementation and performance data for the default configuration of the core.
| UHD/4k 30fps, 4:2:2 |
UHD/4k 30fps, 4:4:4 |
UHD/4k 60fps, 4:4:4 |
Area (Kgates) |
Freq (MHz) |
|
|---|---|---|---|---|---|
| TSMC 40g | 83 | 500 | |||
| TSMC 28hpm | 68 | 800 | |||
| TSMC 16 | 75 | 1,000 |
Note that the list of video formats is not exhaustive, and that these sample implementation figures do not represent the highest speed or smallest area possible for the core. Please contact CAST to discuss silicon resource utilization and performance for your target technology.
The JPEG-EX-S core can be mapped to any Altera Device (provided sufficient silicon resources are available) and optimized to suit the particular project’s requirements. The following table provides sample implementation and performance data for the default configuration of the core.
| 1080p30 4:2:2 |
720p60 4:4:4 |
1080p60 4:2:2 |
Logic Resources |
DSPs | Memory Bits |
|
|---|---|---|---|---|---|---|
| Max10 | 10,746 LEs | 8 | 51,901 | |||
| CycloneV | 4,070 ALMs | 4 | 52,458 | |||
| Arria10 | 3,999 ALMs | 4 | 52,354 |
Note that the list of video formats is not exhaustive, and that these sample implementation figures do not represent the highest speed or smallest area possible for the core. Please contact CAST to discuss silicon resource utilization and performance for your target technology.
The JPEG-EX-S core can be mapped to any AMD Device (provided sufficient silicon resources are available) and optimized to suit the particular project’s requirements. The following table provides sample implementation and performance data for the default configuration of the core.
| Device Family | LUTs | DSP | BRAMs | Freq. (MHz) |
|---|---|---|---|---|
| Artix-7 (speed grade -1) |
3,596 | 16 | 2 | 166 |
| Kintex-7 (speed grade -1) |
3,577 | 16 | 2 | 200 |
| Spartan-7 (speed grade -2) |
3,573 | 16 | 2 | 130 |
| Kintex Ultrascale+ (speed grade -1) |
3,513 | 16 | 1.5 | 250 |
| Artix Ultrascale+ (speed grade -1) |
3,512 | 16 | 1.5 | 240 |
| Versal Prime (speed grade -2) |
3,616 | 16 | 1.5 | 250 |
Please note that these sample implementation figures do not represent the highest speed or smallest area possible for the core. Please contact CAST to discuss silicon resource utilization and performance for your target technology.
The JPEG-EX-S core can be mapped to any Lattice Device (provided sufficient silicon resources are available) and optimized to suit the particular project’s requirements. The following table provides sample implementation and performance data for the default configuration of the core.
| Family /Device | Logic Resources |
Memory Resources |
Fmax (MHz) |
|---|---|---|---|
| ECP5U LAE5U-12F |
12,945 LUT4 8 MULT18 |
11 EBR | 95 |
| CrossLink-NX LIFCL-40 -8HP |
10,558 LUT4 8 MULT18 |
12 EBR | 109 |
Note that the implementation figures do not represent the highest speed or smallest area possible for the core. Please contact CAST to discuss silicon resource utilization and performance for your target technology.
The JPEG-EX-S core can be mapped to any Microchip Device (provided sufficient silicon resources are available) and optimized to suit the particular project’s requirements. The following table provides sample implementation and performance data for the core configured to support monochrome images with 8-bit and 12-bit per pixel, fixed Huffman Tables, and an external raster to block conversion block supporting 1Mpixel images.
| Family / Device | Logic Resources |
Memory Resources / Device |
Freq (MHz) / Device |
|---|---|---|---|
| RTG4 / RT4G150-STD | 12,086 4LUTs 4 MACC |
31 RAM64x18 14 RAM1Kx18 |
75 |
Note that the above implementation figures do not represent the highest speed or smallest area possible for the core. Please contact CAST to discuss silicon resource utilization and performance for your target technology.
Engineered by Beyond Semiconductor.
Features List
Performs Baseline and Extended Sequential DCT JPEG encoding of images or video for ASICs or FPGAs, with small silicon area, high performance, and low latency.
Standards Support
- ISO/IEC 10918-1 Standard Baseline and Extended Sequential DCT modes
- Single-frame JPEG images and Motion JPEG payloads
- 8-bit and 12-bit per color samples
- Up to four color components; any image size up to 64k x 64k
- All scan configurations and all JPEG formats
- APP, COM, and restart markers
- Programmable Huffman and Quantization tables
Rate Control Options
- Image: Limits the size of each individual frame
- Video: Regulates bit rate over a number of input frames.
Interfaces
- AXI Streaming I/O data interfaces
- APB Control/Status interface
Performance and Size
- One encoded sample per clock cycle
- Small silicon footprint (about 80k ASIC gates)
Ease of Integration
- Automatic program-once/encode-many operation
- Simple, dedicated timestamps interface
- Included bit-accurate software model generates test vectors, expected results, and core programming values
- Optional Raster-to-Block Conversion with AXI or standard memory interface to the lines buffer
Resources
See the JPEG entry at Wikipedia.
See the Motion JPEG entry at Wikipedia.